This Checklist is provided courtesy of Chuck, please reference the full guide at Chuck's Guides

SARH Missiles

Applicable to R-3R, AND RS-2US missiles

1) Turn ON (UP) weapon system switches (in black) on armament panel.

2) Warm up radar (5 minutes, do that on the ground) by using the radar mode switch to STANDBY (middle position). Then, set radar mode to ON (UP position) and LOW ALT switch to middle position.

3) Set Air/Ground Mode switch to AIR and Missile Mode switch to SAR (DOWN).

4) Select appropriate missile pylon (example: R-3R SARH missile on inner left pylon, select pylon 1). NOTE: 1-2 and 3-4 fire 2 missiles in quick succession.

5) Turn ON ASP gunsight pipper and fixed net.

6) Set ASP gunsight to LNC (launch = DOWN),S (shooting mode = UP), AUT (automatic = UP) and CC (ASP MISSILE mode).

7) Find target on radar (see radar tutorial of in previous section), slew your TDC on it and lock it with the RADAR LOCK button on your stick.

8) Target range should be updated on both your ASP gunsight (see next page for details) and radar “CHASE” mode screen.

9) Launch missile holding “WEAPONS RELEASE” button when you are in lethal missile range.

10) Maintain radar lock by following your target until missile impact.

Please enter typos and erros in this checklist here
Please enter recommendations and ideas for this checklist here