This Checklist is provided courtesy of Chuck, please reference the full guide at Chuck's Guides

Air to Ground Rockets

1. Determine target altitude using the F10 map (in our case 0 ft). Add target elevation to your dive bombing table altitude parameters in the table below.

2. Set gunsight depression to approx. 14 mil using the DEPR knob for a rocket run done with a 20 deg dive angle

3. Set gunsight mode to MANUAL

4. Power on armament pylons with the rocket pods you want to use.

5. Select external store release (RKT/DISP)

6. For a 20 deg rocket run dive, initiate dive from 5000 ft at 350 kts.

7. Use your altimeter, speed indicator and attitude indicator to fly with correct bombing parameters. For a 20 deg dive, maintain airspeed at 400 kts.

8. Launch rockets at 1500 ft above ground level by pressing the WEAPON RELEASE BUTTON (Ralt+Space).

Rocket Table
Parameter Dive Angles (degrees)
20 30
Dive initiation altitude (ft AGL) 5000 6000
Dive initiation speed (kts) 350 to 370 350
Release altitude (ft AGL) 1500 2000
Release speed (kts) 400 400
Reticle Depression (mils) 14 10

Please enter typos and erros in this checklist here
Please enter recommendations and ideas for this checklist here