No DropDowns for this Checklist

Taxi to Parking Stand & Engine Shutdown

1) After the Landing Roll-out, disconnect the Nose Wheel Brake and un-pressurize the Cockpit. The Canopy can be opened if necessary.

2) Ensure all Armament and Radar Switches are Off and the Trigger is in its Safe Position.

NOTE If the Pilot wants to shut down one Engine while Taxiing to the Parking Stand, the LH Engine must be stopped first. This is because the Hydraulic Pump that controls the Afterburner Nozzle Petals is powered by the RH Engine.

3) Taxi to the Parking Stand and, once Parked, increase Engine RPM to 10,000 for 1 minute.

4) After this, put both Throttles in the “Stop” position.

5) Turn Off all the Cockpit Switches except “Pump Tank 1” and “Battery”.
Once both Engines have completely stopped rotating, turn these Off.


Please enter typos and erros in this checklist here
Please enter recommendations and ideas for this checklist here