Pilot Engine Start

Order plane captain to connect and apply starter air and apply external power.

Wait for confirmation.

If wings are not in OV SWP

WING SWEEP DRIVE NO. 1 and WG SWP DRIVE NO 2/MANUV FLAP cb’s (LE1, LE2) - Pull.
Emergency WINGSWEEP handle - Extend and match captain bars with wing position tape.
CAUTION
Wings will move to emergency handle position regardless ofwing-sweep circuit-breaker (cb) position.

ICS - Check.

N/A

Landing gear indicator and transition light - Check.

Check gear position indication down and transition light off.

MASTER TEST switch - Check.

LTS - Check that all warning, caution and advisory lights illuminate.
FIRE DET/EXT - Check that L and R FIRE and GO light illuminate.
INST - Check for following responses on instruments after 5 secs
RPM - 96%.
EGT - 960 °C.
FF - 10500 Pph.
AOA - 18±5.
Wing sweep - 45°±2.5°.
FUEL QTY - 2000±200 Pounds.
Oxygen quantity - 2 Liters.
L and R FUEL FLOW lights - Illuminated.
MASTER TEST switch - OFF.
Coordinate with RIO.
Set brightness of the ACM panel and indexer lights during test.
The DATA LINK switch must be on to check DDI lights.
Makes L STALL and R STALL warning lights flash.
Verify RIO FUEL QTY.

Ejection seats - Armed.

Verify RIO seats armed.

CANOPY handle - Close.

N/A

ACM panel - Set.

Gun rate - Set and check rounds remaining.
SW COOL - OFF.
MSL PREP - OFF.
MSL MODE - NORM.
Station loading status windows - Check.
Verify consistency with loaded armaments.

EMERG STORES JETT pushbutton light - Out.

N/A

LADDER light - Out.

Order plane captain to stow boarding ladder and steps.

Inform RIO - Ready to start.

N/A

Please enter typos and erros in this checklist here
Please enter recommendations and ideas for this checklist here